Position size is the money you're prepared to lose on a trade divided by the distance from your entry to your stop. Risk 1% of a $10,000 account and you can lose $100. Buy at 100 with a stop at 95 and each unit loses 5, so you hold 20. This position size calculator does that sum for shares, coins, forex units or pounds per point, in whatever currency your account is in.
Position size calculator
This is arithmetic, not advice. Slippage and fees change the real number.
Pick your account currency, then enter the balance in that currency. The picker only changes the symbol shown; it doesn't convert anything. Nothing you type leaves your browser.
The position size formula
Risk amount = account balance × risk %Position size = risk amount ÷ (entry − stop)
For a short, the stop sits above the entry, so drop the minus sign and use the distance. The first line is your risk budget in money. The second divides it by what one unit (one share, one coin, one pound per point) loses if price walks from your entry to your stop, which gives the number of units that spends exactly that budget.
The formula doesn't know about the spread, your commission, or how far past your stop the market can trade before the order fills. All three make the real loss a little bigger than the plan, so treat the answer as a ceiling.
Four worked examples
| Trade | Size | Risk | Stop |
|---|---|---|---|
| FTSE spread bet, £8,000 | £2 a point | £80 | 40 points |
| Indian shares, ₹4,00,000 | 125 shares | ₹4,000 | ₹32 |
| Bitcoin, $3,000 | 0.01875 BTC | $30 | $1,600 |
| EUR/USD, $5,000 | 20,000 units | $50 | 25 pips |
Made-up prices, picked so the arithmetic is easy to follow. None of these is a trade idea. The entry and stop for each row are below, and the calculator gives the same answers.
UK spread bet: the answer is your stake per point
Say you buy the FTSE 100 at 8,250 with a stop at 8,210. In a spread bet the units are pounds per point, so £80 of risk over a 40-point stop is £2 a point. If the FTSE falls to 8,210 you lose 40 × £2 = £80, plus the spread, on an exposure of £16,500 (2 × 8,250). Your provider decides what a point is: on the FTSE 100 it's one index point, on EUR/USD it's usually 0.0001, so a 25-pip stop is 25 points. UK providers must also publish the share of their retail clients who lose money; read it before you size anything.
Indian shares: round down to whole shares
Buy at ₹1,240 with a stop at ₹1,208 and the stop is ₹32 away. ₹4,000 over ₹32 is exactly 125 shares. Had the sum come to 125.6, you would buy 125, never 126. Look at the position value, though: ₹1,55,000 is nearly 39% of the account, on a trade that risks 1% of it. That's normal: you sized from the stop, not from a feeling about how much to put in. This example is arithmetic for learning, not a view on any stock.
Bitcoin: fractions are fine, order steps are not
Buy at 64,000 with a stop at 62,400: $30 over a $1,600 stop is 0.01875 BTC, about $1,200 of Bitcoin. The calculator shows 0.01875. If your exchange only takes steps of 0.0001 BTC, rounding to 0.0188 would risk slightly more than $30, so round down: 0.0187 is the safe side.
EUR/USD in a dollar account: units, then lots
Buy at 1.0850 with a stop at 1.0825 and the stop is 0.0025 away (25 pips). $50 over 0.0025 is 20,000 euros of EUR/USD, which is 0.20 standard lots. This shortcut works when your account is in the pair's quote currency (dollars, for EUR/USD). With a pound account, convert the budget first: say £50 at a GBP/USD rate of 1.2500 is $62.50, which gives 25,000 units, or 0.25 lots. The lot size calculator does this straight from a stop in pips, and the pip calculator gives you the pip value for any pair.
Why a tighter stop means a bigger position
Your risk is a fixed sum, so units × stop distance stays the same. Halve the stop and the position doubles. Push it far enough and the calculator will tell you to buy more than your account is worth: with $10,000, 1% risk and a stop 0.50 under a $100 stock, the formula says 200 shares, which is $20,000 of stock. You can only hold that on margin.
When that happens, read the position value line as a warning, not a target. A stop that tight often sits inside normal noise, and a big position on a tight stop is the setup that hurts most when price gaps.
How much of the account should you risk per trade?
We won't give you a number, because it depends on how you trade and how much a bad month hurts. Babypips notes that many traders risk 1% to 2% per trade and suggests 0.5% or less for beginners. What we can show is what a losing run does at each level, with every loss taken from the balance you have left.
| 0.5% risk | 95.1 |
| 1% | 90.4 |
| 2% | 81.7 |
| 3% | 73.7 |
| 5% | 59.9 |
From 59.9 you need a 67% gain just to get back to 100.
Source: Arithmetic: 100 × (1 − risk)^10, each loss taken from the remaining balance
Ten losers in a row sounds rare. At a 40% win rate, the chance that a given run of ten trades all lose is about 0.6% (0.6 to the power of 10). Over a few hundred trades you will probably meet a streak like that, so pick a risk level you could sit through it with.
Mistakes that make the answer wrong
- Reading risk % as position %. Risking 1% doesn't mean putting 1% of your money into the trade. In the Indian shares example, 1% risk is a position worth 39% of the account.
- Measuring the stop on the chart, not from your fill. Charts usually show the bid. Buy at the ask and your real stop distance is the chart distance plus the spread.
- Mixing up pips, points and ticks. MetaTrader 5 counts points in the fifth decimal on most forex pairs, so a 25-point stop on EUR/USD is 2.5 pips, not 25.
- Confusing lot size with contract size. One forex lot is usually 100,000 units, one gold lot is usually 100 ounces, and an index CFD lot is whatever the broker's contract specification says. The gold lot size calculator covers the ounces.
- Using the wrong currency. A pound or naira account trading a dollar market has to convert the risk budget into dollars first, or the size is off by the exchange rate.
Using it with a WolfGPT chart read
WolfGPT reads chart screenshots. On the trial or a paid plan the read lists an entry, a stop-loss and three take-profit levels, each with its own risk to reward. Those levels are the model's reading of the chart, not an instruction, and they can be wrong. They do give you a stop to size from: paste the entry and stop into the calculator above and you see what that stop costs your account before you decide anything. Then test the targets in the risk reward calculator.
Questions people ask
Does leverage change my position size?
No. Position size comes from your risk budget and your stop. Leverage only sets how much margin your broker holds while the trade is open. High leverage lets you open a big position with little cash, which is exactly why it is easy to oversize: the margin check passes long before the risk check would.
What is the difference between position size and lot size?
They describe the same thing in different units. Position size is usually counted in units (shares, coins, currency) and lot size in the broker's lots. In forex, 20,000 units is 0.20 standard lots, because a standard lot is 100,000 units of the base currency.
How do I size futures or F&O contracts with this?
Work out the units first, then divide by the contract's lot size and round down. Say a stock future has a lot of 500 shares and your sum says 125 shares: even one lot would risk four times your budget, so the stop, the trade or the instrument has to change.
Does it work for short trades?
Yes. On a short the stop sits above the entry, and the calculator uses the gap between the two either way. A short is closed by buying, usually at the ask, so add the spread to the stop distance when it is wide.
Should commission come out of the risk budget?
If you want an honest number, yes: take the round-trip commission off the budget before you divide. On a wide swing stop it barely moves the answer. On a scalp with a stop of a few pips, costs can cut the right size by a quarter or more.